Furuno FEA-2100 - Page 418

402 •
••
• Alarms
Alarm number 4006: GYRO ERROR /3
------------------------------
GYRO2 DATA IS NOT RECEIVED
CORRECTLY.
USE 'SENSORS' SPEED/POSITION
PAGE TO SELECT VALID SENSORS.
Alarm number 4008: LOG ERROR /3
------------------------------
LOG DATA IS NOT RECEIVED
CORRECTLY.
USE 'SENSORS' SPEED/COURSE
TO SELECT VALID SPEED SENSORS.
Alarm number 4009: DUAL AXIS LOG ERROR /3
------------------------------
DUAL AXIS LOG DATA IS NOT RE-
CEIVED CORRECTLY.
USE 'SENSORS' SPEED/COURSE
TO SELECT VALID SPEED SENSORS.
Alarm number 4010: ECHO SOUNDER ERROR /3
------------------------------
ECHO SOUNDER DATA IS NOT RE-
CEIVED CORRECTLY.
VERIFY ECHO SOUNDER OPERATION.
Alarm number 4011: WIND SENSOR ERROR /3
------------------------------
WIND SENSOR DATA IS NOT RE-
CEIVED CORRECTLY.
VERIFY WIND SENSOR OPERATION.
Alarm number 4012: POSITION EQUIPMENT ERROR /1
------------------------------
POSITION EQUIPMENT 1 DATA IS
NOT RECEIVED CORRECTLY.
USE 'SENSORS' POSITION
TO SELECT VALID POSITION
SENSORS.
Alarm number 4013: POSITION EQUIPMENT ERROR /1
------------------------------
POSITION EQUIPMENT 2 DATA IS
NOT RECEIVED CORRECTLY.
USE 'SENSORS' POSITION TO
SELECT VALID POSITION SENSORS
Alarm number 4014: POSITION EQUIPMENT ERROR /1
------------------------------
POSITION EQUIPMENT 3 DATA IS
NOT RECEIVED CORRECTLY.
USE 'SENSORS' POSITION
TO SELECT VALID POSITION
SENSORS.
Alarm number 4015: POSITION EQUIPMENT ERROR /1
------------------------------
POSITION EQUIPMENT 4 DATA IS
NOT RECEIVED CORRECTLY.
USE 'SENSORS' POSITION
TO SELECT VALID POSITION
SENSORS.