Furuno FMD-3100 - How to Select the User Chart Objects to Display; How to Import a User Chart; User Chart Created on Another Unit

10. USER CHARTS
10-9
10.7 How to Select the User Chart Objects to Display
User charts can be displayed on the electronic chart. On the InstantAccess bar™, click
[DISP], [SET], and [Symbol DISP]. Open the [Mariner] page and check the user chart
items to display. Choose the degree of transparency for the objects with [Density].
Note: Alpha blending technology is used for transparency effects.
10.8 How to Import a User Chart
10.8.1 User chart created on another unit
Do as follows to import user charts created on other units (FMD-3x00, FCR-2xx9,
FAR-3xx0).
1. Copy the user chart to a USB flash memory then insert the flash memory in the
USB port on the PCU.
2. Click the Settings button ( ) on the Status bar then select [Settings].
3. Click the [OK] button to open the [Settings] menu.
4. Click the [File Import] tab.
5. Put a checkmark at [Route/User chart].
6. Click the [Import] button.