22. SETTINGS MENU
22-3
22.3 File Import
The [File Import] page lets you import FMD-3xx0 series created setting data, routes/
user charts and playback data from a USB flash memory.
Note 1: Item 2 does not appear until after a file is selected. Item 3 appears after the
data to import is selected.
Note 2: The message "Now processing" appears during the importing, and the mes-
sage "File import finished." appears upon completion. Click the [OK] button.
Note 3: The size of the log data is large, thus some time may be required to import the
data.
Note 4: The system automatically restarts after setting data is imported.
Note 5: If importing could not be completed, first check if the USB flash memory is
properly inserted. If inserted properly, try importing again.
No. Name Description
1 Select file to import
button
Click to show the [OPEN FILE] dialog box, where you can
select the file to import.
2 Data selection Check the data to import, setting data and route/user chart.
3 [Import] button Click to import the ob-
jects selected. The
message shown right
appears.
Playback data
Following data will be replaced with the imported
data, and system will reboot automatically.
Please export current data before import if needed.
- Setting data
- Route/User chart
Do you wish to continue?
To Next Page
Loading...
