PRE-DELIVERY INSPECTION PROCEDURE
1-3
PRE-DELIVERY INSPECTION PROCEDURE
1. EXTERIOR
Check distortion and damage of body panels.
Check painting, rusting and flaws of body pan-
els.
Check all door and other parts for proper spac-
ing at top and bottom, front and rear, in and out.
Check that all windows and mirrors are installed
properly.
Check for secureness of the cab mounting.
2. OPERATION OF LAMPS AND SWITCHES
Check operation of all lamp and switches.
Head lamp
Front combination lamp
Fog lamp
Front side turn lamp
Stop/tail lamp
Rear turn signal lamp
Backup lamp
License plate lamp
Step lamp
Room lamp (incandescent)
3. VEHICLE ATTITUDE (INCLINATION)
At the front and rear of vehicle, check for right-
ward and leftward inclination.
Rightward inclination
measured at the vehicle
front outside
20 mm or less
Leftward inclination
measured at the vehicle
front outside
15 mm or less
FUSO ASCENT-ALEJANDRO CANTO
To Next Page
Loading...