PRECAUTIONS BEFORE SERVICE
0-4
PRECAUTIONS BEFORE SERVICE
1. If there is a likelihood of damaging or smearing
painted parts or interior parts during service opera-
tion, it is necessary to protect them with suitable cov-
ers (such as seat covers, etc.).
2. Service operations should be performed on a level
ground whenever possible and make sure that the
wheels are blocked.
3. When the vehicles is raised on a jack, use a rigid
rack for the sake of safety.
4. Use special tools for disassembly and reassembly
operations.
5. Bolts and nuts should be tightened to specified
torques.
6. When no standard torque is specified, bolts and nuts
should be tightened in accordance with the TIGHT-
ENING TORQUES FOR GENERAL USE BOLTS
AND NUTS.
7. When disassembling an assembly comprising many
parts, similar parts, or those parts which are identical
for the right and left sides, place them separately so
that they will not become mixed with other parts at
the time of reassembly.
8. Before cleaning parts to be removed or disassem-
bled, carefully check the parts for oil leakage, etc.
FUSO ASCENT-ALEJANDRO CANTO
To Next Page
Loading...