Can be switch the group
with the group change
switch.
When changing the gain with
the switch, indicated on the
home screen for a few sec-
onds.
* Display the current gyro gain.
112
Function
Gyro Mixing
3
(Gyro mixing type selection)
Touch the Gyro type and select [1 gain], [2
gain] or [4 gain].
"1 gain" :One mode only
"2 gain" :Switching Gyro gain 1 and Gyro gain 2
"4 gain" :Set 4 Gyro gains.
2 groups of 2 gains can be set in one
group.
Set the switch to change the group and
the switch to change the gain in the
group. (Use to 2 switch)
4
(Gyro gain adjustment)
Tap the value button of each the [Gain]. Val-
ue input buttons appear on the screen, use
the [+] and [-] buttons to adjust the brake
rate amount.
If you tap "Normal" or "AVCS" when the
value is other than "0", Normal / AVCS is
reversed.
5
When fi nished, return to the Mixing menu screen by pressing the HOME button twice.
The gain amount can be adjusted by using the dial select function. (page 66)
Dial / Trim Setting
Setting
- Tap Gain type.
1 gain/ 2 gain/ 4 gain
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Gyro gain
Normal:0~120
AVCS:0~120
Initial value:50
1M23N32602_7PX_E.indb 112 2017/08/02 14:17:31
To Next Page
Loading...
