Setting
- Tap (R) / (N).
(N) Normal / (R) Reverse
Home screen
Menu screen
Menu-2
Menu-1
Linkage menu
Channel Reverse
For S-FHSS (analog) system, 5 to
7 channels are displayed on the
2nd page.
Tap to change page.
53
Function
Channel Reverse
However, when the position set by trim or sub trim shifts from
the center, the center becomes the opposite side.
Channel Reverse
This function reverses the direction of operation of the servos related to transmitter
steering, throttle, channel 3, and channel 4 operation.
1
(Servo reverse setting)
Tap the desired channel’s setting button to
choose the proper direction for the servo.
(Each channel can be set similarly.)
Servo Reverse Function Setting
2
When fi nished, return to the Linkage menu screen by pressing the HOME button.
1M23N32602_7PX_E.indb 53 2017/08/02 14:17:16
To Next Page
Loading...
