Home screen
Menu screen
Menu-2
Menu-1
Linkage menu
Switch select
Since there are
multiple pages,
tap the
mark
and move the
page. When you
are done, tap
[Close] to fi nish.
The steering switch and trig-
ger switch are displayed on
the 2nd page.
Function list
See page 71
69
Function
Switch select
Switch select
This function allows selection of the function to be performed by the switches (PS1, PS2,
PS3, PS4, PS5, PS6, steering wheel, throttle trigger) and setting of the direction, etc. of op-
eration.
- The table in the page 71 lists the functions that can be assigned to each push switch.
- The push switch PS6 is integrated with the DL 1.
- All switches can be made alternating operations (ON/OFF switched each time SW
pressed). (Nor/Alt)
- The ON/OFF direction can be reversed. The reverse select function always starts from
the ON state. However, the steering/ trigger switch is different, depending on the posi-
tion. (Nor/Rev)
1
(Function setup)
Tap the switch you want to set.
(PS1, PS2, PS3, PS4, PS5, PS6/ steering
wheel, throttle trigger)
The function list appears on the
switch select menu screen. Tap and
select the function you want to use. To
cancel, tap [Close].
Function select dial setup
1M23N32602_7PX_E.indb 69 2017/08/02 14:17:21
To Next Page
Loading...
