FUTABA 7PX - Throttle Curve (Forward Side)

Home screen
Menu screen Racing menu screen Curve screen
Steering curve
* Touch the type to switch the
curve type.
EXP curve screen
Curve type which operates the
throttle from the neutral point to
the high point on a curved curve.
Curve screen
Curve type which sets 9 points
between the throttle neutral point
and high point and operates the
throttle.
VTR curve screen
Curve type which sets the switching point
between the throttle neutral point and
high point and operates the throttle on a
linear curve.
0%
Normal
0%
Normal
+1% ~ +100%
+1% ~ +100%
Trigger operation Trigger operation Trigger operation
Quick Quick
-1% ~ -100%
-1% ~ -100%
Mild Mild
Servo travel Servo travel Servo travel
80
Function
When the course conditions are good and the surface has good grip, set each curve to the
plus [+] side (quick side). When the road surface is slippery and the drive wheels do not
grip it, set each curve to the minus [-] side (mild).
Advice
Throttle curve (Forward side)
This function makes the throttle high side direction servo operation quicker or milder. It has
no effect on the servo maximum operation amount.
For the selection from among three kinds of curves (EXP/VTR/Curve) is also possible.
Curve (EXP)
1M23N32602_7PX_E.indb 80 2017/08/02 14:17:24