* The vertical cursor line moves in
conjunction with the operation of
the throttle trigger.
* The vertical cursor line moves in
conjunction with the operation of
the throttle trigger.
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Curve rate
-100~+100
Initial value : 0
Point
1~99
Initial value : 50
81
Curve (EXP)
(Preparation)
-Touch the curve type and select [EXP].
1
Tap the value button of the [EXP rate].
Value input buttons appear on the screen.
When you want to quicken Throttle opera-
tion, use the [+] button to adjust the + side.
When you want to make Throttle operation
milder, use the [-] button to adjust the - side.
If you tap "Quick" or "Mild" when the value
is other than "0", Quick / Mild is reversed.
To set the right and left Throttle curves sep-
arately, tap the rate in the direction you wish to change the
setting. Value input buttons appear on the screen, use the [+]
or [-] buttons to adjust the Throttl ecurve.
Adjustment method for EXP curve
2
When finished, return to the Racing menu screen by pressing the HOME button twice.
(Preparation)
-Touch the curve type and select [VTR].
1
Tap the value button of the [VTR rate].
Value input buttons appear on the screen.
When you want to quicken throttle opera-
tion, use the [+] button to adjust the + side.
When you want to make throttle operation
milder, use the [-] button to adjust the - side.
If you tap "Quick" or "Mild" when the value
is other than "0", Quick / Mild is reversed.
2
Curve switching point adjustment
Tap the value button of the [Point]. Value input buttons ap-
pear on the screen, use the [+] or [-] buttons to move to the
point you want to set.
Throttle VTR adjustment
3
When finished, return to the Racing menu screen by pressing the HOME button twice.
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Curve rate
-100~+100
Initial value : 0
The throttle EXP, VTR adjustment can be controlled with digital trim DT1~DT6 or digi-
tal dial DL1 etc. with the dial select function. (page 66)
Dial / Trim Setting
1M23N32602_7PX_E.indb 81 2017/08/02 14:17:24
To Next Page
Loading...
