Timer
Use the timer by selecting one of the four timers Up timer, Fuel down timer, Lap timer and
Lap navigate timer.
Timer
Up timer function
- The Up timer can be used to count the time between start and stop, etc.
- The timer repeatedly starts and stops each time the switch is oper
-
ated and accumulates the time between each start and stop. (When
the count reaches 99 minutes 59 seconds, it returns to 00 minutes 00
seconds and repeats the count.)
- The rst start operation can be linked to the throttle trigger.
- An alarm sound can be set. The passage of time is announced by
sounding of a buzzer (beeps) each minute after starting.
- Alarm :Generates a beep at the set time (minutes).
- Pre-alarm :Alarm advance announcement sound. Sounding begins 10 seconds before the set alarm time.
- After starting, the timer is enabled and can be stopped by switch even when the display
switches to another screen.
Fuel down timer function
- The Up timer can be used to count the time between start and stop, etc.
- The timer repeatedly starts and stops each time the switch is oper
-
ated and accumulates the time between each start and stop. (When
the count reaches 99 minutes 59 seconds, it returns to 00 minutes 00
seconds and repeats the count.)
- The rst start operation can be linked to the throttle trigger.
- An alarm sound can be set. The passage of time is announced by
sounding of a buzzer (beeps) each minute after starting.
- Alarm :Generates a beep at the set time (minutes).
- Pre-alarm :Alarm advance announcement sound. Sounding begins 10 seconds before the set alarm time.
- After starting, the timer is enabled and can be stopped by switch even when the display
switches to another screen.
1M23N32602_7PX_E.indb 127 2017/08/02 14:17:34
To Next Page
Loading...
