4WS Mixing
4
(Rear side travel adjustment)
Tap the value button of the [Rear mix rate].
Value input buttons appear on the screen,
use the [+] and [-] buttons to adjust the
rear side travel amount.
5
(Mix mode setting)
Tap "MIX mode" (ON) or (OFF) to select ON
/ OFF.
"OFF" :The EXP function of the 1st CH and other settings are not mixed.
"ON" :The EXP function of the 1st CH and other settings are mixed.
6
When finished, return to the Mixing menu screen by pressing the HOME button twice.
The mixing amount can be adjusted by using the dial select function. (page 66)
Dial / Trim Setting
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Rear rate (Rear mix rate)
0~100
Initial value:100
Setting
- Tap (ON) / (OFF).
1M23N32602_7PX_E.indb 115 2017/08/02 14:17:31
To Next Page
Loading...
