FUTABA 7PX - Page 176

177
Function
Display
4
(Tap panel sensitivity adjustment)
You can adjust the sensitivity of the tap panel.
Tap the value button of the [Sensitivity]. Value input buttons
appear on the screen and use the [+] and [-] buttons to ad-
just the sensitivity of the touch panel.
5
(Touch Panel Vibrate ON / OFF)
The vibrate can be operated by the operation of the touch
panel. Tap on the "Vibrator" (ON ) or (OFF) and select ON /
OFF.
"OFF" :Function OFF
"ON" :Function ON
6
(Setting of start / end screen)
Set whether or not to display the Futaba T7PX logo mark on
startup and exit screens. If it is set to OFF, it disappears.
Tap on the "Opening demo" (ON ) or ( OFF) and select ON /
OFF.
"OFF" :Function OFF
"ON" :Function ON
7
When finished, return to the System menu screen by press-
ing the HOME button.
Adjust button
Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Sensitivity
10~100
Initial value : 30
Setting
- Tap (ON) / (OFF).
Setting
- Tap (ON) / (OFF).
1M23N32602_7PX_E.indb 177 2017/08/02 14:17:47