FUTABA 7PX - Condition

Display condition number for
a few seconds.
Condition number
: Background Black · Around Green
: Background Black · Around Red
Condition number
: Background Green
: Background Red
On the function screen which can set the condition and the
screen which can not be set, the background color of the
number is different.
Setting
- Tap (ON) / (OFF).
77
Function
Condition
(Preparation)
- Use the switch select function to the "Switch select". (page 69)
1
(Function ON/OFF)
Tap mode (ON) or (OFF) to select ON / OFF.
"OFF" :Function OFF
"ON" :Function ON
Condition copy display becomes active and the condition can
be used.
2
(Condition copy)
Tap the condition copy direction. To copy from
Condition 1 to Condition 2, tap [Copy 1 2],
from Condition 2 to Condition 1, [Copy 2
1]. A
confi rmation message will be displayed as "Are
you sure?" Tap [Yes] to execute, or [No] to can-
cel.
Idle-up function adjustment
3
When fi nished, return to the Linkage menu screen by pressing the HOME button.
Display when using condition.
1M23N32602_7PX_E.indb 77 2017/08/02 14:17:23