GAC GA8 - Page 107

⑪ Temperature up button (rear)*
⑫ Temperature down button (rear)*
NOTE
• The A/C system can also be controlled by
pressing any button on the A/C control
panel and switching the AV system display
interface to the A/C system control
interface.
•
Some functions specific to the A/C system
can be set in “System Settings → AC &
Seat → A/C (Car Settings → A/C Settings)”
of AV system.
Temperature setting
Pull up or press
button (or press
*/
button) to increase/decrease the
temperature at increments of 0.5℃.
–
The set temperature can be adjusted within
18.5-31.5 ℃
. When the set temperature is
lower than 18.5 ℃ , LO is display
ed, and
above 31.5 ℃, HI.
In auto mode, when LO/HI is displayed, the
system will keep high air volume.
In auto mode, in order to obtain the most
satisfactory indoor temperature, it is
recommended to set the temperature to 25.0℃,
and adjust the temperature if necessary.
A/C cooling button
Press the A/C button. The button indicator lamp
will come on, and the A/C system will start cooling.
Press the A/C button again. The button indicator
lamp will go out, and the A/C system will stop
cooling.
Auto mode
Press the AUTO button. The button indicator lamp
will come on, and the A/C system will enter the
auto mode. The following functions will be
automatically controlled according to the set
temperature:
– Outlet air temperature.
– Air volume at the air outlet.
– Air supply mode.
– Air circulation mode.
– The working state of the A/C cooling function.
–
The working state of the negative ion air
purifier.
Press button or
button to exit the auto
mode of the A/C system.
101
4. Operation of Systems and Equipment