8.1 Driver’s tools and spare tire
Driver's tools
The following tools are
provided with this car. After
use, they shall be cleaned in time and placed in
the tool kit.
① Jack
② Wrench bolt removal wrench
③ Towing hook
④ Dual-purpose screwdriver
⑤ Special wrench for jack
⑥ Warning triangle
⑦ Hub trim cover screwdriver*
Spare tire
Remove the spare tire:
–
Open the trunk lid and remove the trunk
carpet.
– Take out the tool kit.
–
Unscrew the spare tire center handwheel
counterclockwise and take out the spare tire.
–
The spare tire has been inflated. Check its
pressure regularly to ensure that it is at the
specified maximum tire pressure, and perform
multiple inspections every year.
WARNING
•
The spare tire shall be used strictly in
accordance with its use requirements to
avoid danger.
• It is strictly prohibited to install and use
more than one spare tire at the same
time.
•
It is forbidden to use spare tires that
have been damaged or worn to the limit.
•
The storage and service life of spare
tires is 6 years. It is prohibited to use
them beyond the time limit.
• After installing the spare tire, check the
tire pressure as soon as possible to
keep it within the specified range.
• The maximum speed of spare tires must
not exceed 80 km/h, and rapid
acceleration and emergency braking
shall be avoided.
To Next Page
Loading...
