GAC GA8 - Front Seats

4.4.2 Front seats
NOTE
When measuring the depth of the seat cushion,
be sure to adjust the front and rear positions of
the seat
to the middle of the slide rail and the
seat back to the normal operating state (25°).
WARNING
•
Do not place objects under the front
seats, for these objects may be caught
between the seat and the slide rail,
hindering the seat from be locked.
• Plea
se adjust the front seat only when
the car is in a stationary state, because
incorrect sitting posture during the seat
adjustment may easily cause casualties.
• Never leave children alone in the car to
prevent them from accidentally
operating the power sea
t and causing
accidents, because the power seat
adjustment mechanism still works after
switching the engine start/stop button to
the "OFF" position.
Seat ventilation*
– Switch the engine start/stop button to the
"ON" position.
– Switch the AV system to the A/C control
interface, click or soft key ①, and
enter the next page to select the seat
ventilation positions or deactivate the seat
ventilation function.
Fold Control Scenario
Synchro
nization
Rear
seats
–
–
Click the / / soft key to activate the
seat ventilation function.
Click the soft key to deactivate the seat
ventilation function.
The seat ventilation has three positions, that is,
, and , corresponding to three different
ventilation speeds, among which the 3rd position
has the highest ventilation speed followed by the
2nd position, and the 1st position has the lowest
ventilation speed.
If you click the / / soft key during the
automatic ventilation process, the automatic
ventilation function will be deactivated and the
current ventilation position will be changed by one
position.
Fold Control Scenario
Synchroni
zat ion
Rear
seats
85
4. Operation of Systems and Equipment