GAC GA8 - Rear Seats

1. Account associated memory
– After logging in to the account, the user can
manually adjust the seat/exterior rearview
mirror, the AV main unit interface will pop up
a box to prompt the user whether to save the
current driver position, and the user can click
Save to memorize the current position in the
corresponding account.
2. Account associated retrieval
–
When the user logs in to the account, the
seat/exterior rearview mirror will be
automatically adjusted to the position
memorized in this account.
–
When the user clicks the retrieval button in
the pop-
up box, the seat/exterior rearview
mirror will be automatically adjusted to the
position memorized in this account.
NOTE
The welcome function and the turning down of
exterior rearview mirror when reversing are both
bound to the account.
Automatic recognition of intelligent remote
control key*
This function can be activated or deactivated by
setting the AV system "System Settings → A/C &
Seat → Intelligent Remote Control Key
Recognition", and when this function is activated:
– If you take away the intelligent remote control
key and leave and lock the car, the positions
of the seat and the exterior rearview mirrors
used before you leave the car will be
memorized and associated with the used
intelligent remote control key.
– If you use this intelligent remote control key to
unlock the car, the seat and the exterior
rearview mirrors will be automatically adjusted
to the positions memorized by the key.
NOTE
The position memorized by the
key is
independent of that memorized by the memory
switch.
4.4.3 Rear seats
Rear center console armrest
– Press the switch ① and turn down the center
console armrest.
NOTE
The center console armrest shall not be seated
by anyone, and shall return to the seat back if
the rear middle seat needs to be occupied.
88
4. Operation of Systems and Equipment