GAC GA8 - Electric Sunroof

Initialization of anti-pinch
function
The power window shall be re-
initialized if the
power window regulator is not equipped and the
anti-pinch function is invalid, or if the initialization
is automatically invalid because the anti-pinch
function is triggered multiple times in a short
period of time.
1. Pull up the power window button, and then the
window is lifted in steps until it is completely
closed.
2. After the window is completely closed, continue
to pull up the power window button and hold it
for 2~3 s to complete the initialization.
WARNING
• If the window has no anti-pinch function
during the initialization learning
process, please do not use any part of
your body or other objects to hinder the
closing of the window, otherwise it will
cause personal injury and affect the
result of the initialization learning.
• If the power window system fails, please
go to the GAC Motor authorized shop
for inspection in time.
4.2.8 Electric sunroof
The electric sunroof can be operated when the
engine start/stop button is in the "ON" position,
and within 40 s after the engine start/stop button is
switched from the "ON" position to the "ACC" or
"OFF" position, but cannot be operated if one of
the doors is opened within the 40 s.
NOTE
When the engine start/stop button is in the
"OFF" position with the electric sunroof not
closed and the driver's door opened, the
instrument cluster will display the message
"Sunroof Open" and send a buzzer sound; in
this case, be sure to check whether the sunroof
is closed.
NOTE
Please close the sunroof, otherwise there will
be a risk of water ingress.
Sun visor*
– Automatic opening: The sun visor will be
automatically opened as the sunroof is
opened.
–
–
Manual opening: Just push the sun visor
backward.
Manual closing: Just push the sun visor
forward after the electric sunroof is closed.
62
4. Operation of Systems and Equipment