NOTE
• Before driving, please check whether there
are any heavy objects on the front
passen
ger’s seat to avoid the system
mistakenly determining that the seat is
occupied and issuing a false alarm.
• If the above-
mentioned alarm still appears
after the seat belt is fastened correctly, it
means that the seat belt device is invalid. In
that case,
please go to the GAC Motor
authorized shop for inspection in time.
Seat belt pretensioner and load limiter
The seat belt pretensioner and load limiter can
reduce the pressure of the seat belt on the chest
of the driver or passenger and improve the
protection performance.
– Before the collision, the seat belt pretensioner
and load limiter can restrain the driver or
passenger and enable him or her to maintain
a correct sitting posture to prevent the body
from leaning forward.
– In the event of a severe collision where the
triggering condition is reached, the seat belt
pretensioner and load limiter will be triggered,
driving the seat belt webbing to be quickly
retracted and tensioned.
– When a collision occurs, the human body will
move forward, and the seat belt pretensioner
and load limiter will be activated at this time,
so that the restraint force of the seat belt on
the human body will be within a certain range,
preventing the driver or passenger from being
further injured due to excessive force. And at
the same time, the seat belt pretensioner and
load limiter will coordinate with the airbag to
achieve a better safety protection
performance.
NOTE
•
When the seat belt pretensioner and load
limiter is activated, a little harmless smoke
will be released, accompanied by a sound,
which is normal.
•
The activated seat belt pretensioner and
load limiter will no longer operate, and the
supplemental restraint system (SRS)
indicator lamp
will stay on. In that
case, please contact the GAC Motor
authorized shop for replacement.
3. Instructions for Safe Operation
To Next Page
Loading...
