Preparation for re
placing bulbs
If it is found that any bulb is damaged, it shall be
replaced as soon as possible. Before
replacement, make the following preparations:
1. Turn off all lamps.
2. Turn the engine start/stop button to the "OFF"
position.
3.
Check whether the related fuse is blown.
When the fuse is in good conditions, perform
bulb inspection and replacement.
Replace the door courtesy lamp bulbs
1. Pry out the arrowed door courtes
y lamp.
2. Disconnect the plug in t
he arrowed position,
and remove the door courtesy lamp ①.
6. In-service Maintenance
To Next Page
Loading...
