WARNING
Improper use of jacks can cause serious injury.
• The jack must be used on a hard and flat
ground, and a hard pad (height not more
than 1 cm) can also be placed under the
jack as needed.
•
Strictly observe the precautions for jack
operation.
•
If there is a trailer, the trailer must be
separated from the car.
• Observe the status of the car continuously
during the lifting process. If the car body is
noticeably tilted, stop the lifting, f
problem, and then lift the car after solving
the problem.
WARNING
• The jack on the car can only be used to
lift the car, rather than other heavy
objects or cars.
• When using the jack, do not start the
engine, otherwise an accident may
occur.
•
When lifting the car with a jack,
remember not to place any part of your
body under the car to avoid accidents.
• If it is required to work under the car,
be sure to place a suitable protective
support under the car.
Install the spare tire
– Install the spare tire to t
he car.
– Install all the wheel bolts, and pre-tighten
them using the wheel bolt removal wrench
according to the sequence ① ~⑤
figure.
– Give a verbal warning, and after confirming
that nobody is around the car, rotate the
jack wrench counterclockwise to lower the
car.
– Tighten all wheel bolts using the wheel bolt
removal wrench.
To Next Page
Loading...
