Blown fuse
– If the fuse has blown,
it is recommended to
replace it at a GAC Motor authorized shop.
NOTE
Some electrical units may be equipped with
multiple fuses each, or multiple electrical units
may share a single fuse.
NOTE
• All electrical equipment must be turned off
before replacement of fuses.
• If it is required to replace the fuse, please
consult the GAC Motor authorized shop.
WARNING
• Fuses must not be reused.
•
Do not use a fuse with rated current
higher than the specified value,
otherwise other components of the
electrical system will be damaged.
• Using an inappropriate or repaired fuse
will cause a short circuit or even a fire.
• The color and logo of the replaced fuse
must be exactly the same as the original
one.
• Never replace a fuse with metal sheets,
clips, etc.
• The PDU must be kept clean inside. Pay
attention to protection against moisture.
8. Accident Handling
To Next Page
