Below
are mainly the installation instructions of the
LATCH system child safety seat.
1. Put the
child safety seat on the seat, find the
lower anchorage ①
, and insert the lower
guide grooves of the child safety seat (as
arrowed) into the lower anchorage ① until a
click sound is heard.
2. Lift t
he head restraint to the highest position,
then pass the strap through the head restraint
pillar, open the protective cover of the upper
anchorage ②
anchorage ② with the strap hook to ensure
that the strap is not twisted.
3. Tension the strap and shake the child safety
seat to ensure it is firmly fixed.
3. Instructions for Safe Operation
To Next Page
Loading...
