GAC GA8 - Page 87

NOTE
This function can be activated or deactivated by
setting the AV system "System Settings →
Body Accessories → Other Accessories → Auto
Folding of Exterior rearview Mirror".
NOTE
•
If the exterior rearview mirror is not
equipped with the electric foldin
g function
or the electric folding function fails, the
mirror can be manually folded which then
shall be manually unfolded. A click sound
can be heard when the mirror is manually
unfolded.
•
Be careful when operating the electric
folding function of the ex
terior rearview
mirror to prevent your fingers from being
pinched by the rearview mirror and its
base.
Turning down of exterior rearview mirror when
reversing*
This function is to automatically turn down the
exterior rearview mirror at a certain angle when
reversing, so that the driver can observe the rear
situation.
Memory of turning down position of exterior
rearview mirror when reversing:
1.
Manual turning down of exterior rearview
mirror when reversing:
–
Switch the engine start/stop button to the
"ON" position, enter the AV system "System
Settings → Body Accessories → Other
Accessories → Manual Angle Adjustment of
Exterior rearview Mirror", and activate the
"Manual Turning Down of Exterior rearview
Mirror When Reversing" function.
– Depress the brake pedal and shift the gear to
"R" position.
–
Adjust the corresponding exterior rearview
mirror to a suitable reversing position. After
the adjustment, release the brake pedal, and
then this position is memorized as the turning
down position of exterior rear
view mirror
when reversing.
2.
Automatic turning down of exterior rearview
mirror when reversing:
–
Switch the engine start/stop button to the
"ON" position, enter the AV system "System
Settings → Body Accessories → Other
Accessories → Automatic Angle Adjustment
of Exterior rearview Mirror", and activate the
"Automatic Turning Down of Exterior rearview
Mirror When Reversing" function.
–
Click the "Setting" soft key for automatic
turning down of exterior rearview mirror when
reversing, and adjust the exterior rearview
mirrors on both sides to suitable reversing
positions. After the adjustment, click the "OK"
soft key, and then this position is memorized
as the turning down position of exterior
rearview mirror when reversing.
Activation of manual turning down of exterior
rearview mirror when reversing
– Enter the AV system to activate the "Manual
Turning Dow
n of Exterior rearview Mirror
When Reversing" function.
–
Switch the engine start/stop button to the
"ON" position, depress the brake pedal and
shift the gear to "R" position.
–
Select the "L" or "R" side exterior rearview
mirror.
– The exterior rearview mirror is turned down to
the memory position.
81
4. Operation of Systems and Equipment