MIC TRAC Operation Manual Model MT-3000
Copyright © 2014 Gagemaker. All rights reserved
1
Contents
Introduction
What is the MIC TRAC? 4
Gagemaker’s Philosophy of Accuracy 4
Technical Support 4
Unpacking and Handling 5
Returning the MIC TRAC 7
Parts List
MIC TRAC Part Descriptions 9
Digital Readout (DRO) Front Panel 10
Digital Readout (DRO) Rear Panel 11
Digital Readout (DRO) Screen Features 13
Setup Procedures
Removing Lifting Lugs 16
Attaching Cables to the Digital Readout 17
Mounting the Flat Face Anvils 19
Connecting the Optional Printer 20
Zeroing the MIC TRAC without Force-Lok 21
Zeroing the MIC TRAC with Force-Lok 22
Changing the MIC TRAC with Force-Lok Measuring Force 23
Changing from Internal to External measurement Mode 23
Changing the Zero Setting 25
Operating Procedures
Measuring Parts with Force-Lok 26
Troubleshooting Guide 28
Care and Maintenance
Maintenance Tips 29
Maintenance Note 29
Safety Tips 29
Warranty Information 30
Product Return or Calibration Process 30
Technical Information 31
To Next Page
Loading...
Need help?
General
