MIC TRAC Operation Manual Model MT-3000
Copyright © 2014 Gagemaker. All rights reserved
13
Digital Readout (DRO) Screen Features
Main Screen Layout
Status Bar
ABS
Current operating mode: Absolute or Relative.
X1
Input from Port X1 is displayed.
SCL
SCL highlighted: Scale factor is active.
COMP
COMP highlighted: Error compensation is active.
00:00
Elapsed time of running stopwatch. Stopwatch is dimmed if not running.
inch
Current active unit of measurement. MM or inch.
INT
External or Internal measurement mode.
Page
Indicates the softkey page you are currently on. 3 pages available.
Position Display
Length display: Current axis value after initial zeroing.
Message Line
Force Symbol: Lights up when the preset measuring force has been reached. Only
displayed when Force-Lok is active.
The message line provides information about the required data input or procedures,
which provide support with using the position display.
If errors or warnings occur, they display in red letters on the message line. Clear the
To Next Page
Loading...
Need help?
General
