GAGEMAKER MIC TRAC MT-3000 - Technical Information

MIC TRAC Operation Manual Model MT-3000
Copyright © 2014 Gagemaker. All rights reserved
31
Technical Information
Operating temperature: 0 to 45 °C
Storage temperature: -20 °C to +70°C
Main power supply (automatic switching): 115V +-20% or 230V +-20% (48-62 Hz)
Printer Settings
Baud Rate 9600
Data Bits 8
Parity Odd
Specifications
Overall Dimensions
MT-3012 Base Unit
28.5" x 9.00" x 11.25" ( 723.9mm x 228.6mm x 285.75mm)
MT-3024 Base Unit
40.0" x 9.00" x 11.25" (1016.0mm x 228.6mm x 285.75mm)
MT-3036 Base Unit
52.5" x 9.00" x 11.25" (1333.5mm x 228.6mm x 285.75mm)
MT-3048 Base Unit
63.5" x 9.00" x 11.25" (1612.9mm x 228.6mm x 285.75mm)
DRO
See page 30
Weights
MT-3012 Base Unit
98.0lbs. (44.5 kg)
MT-3024 Base Unit
126.0lbs. (51.3 kg)
MT-3036 Base Unit
158.0lbs. (71.8 kg)
MT-3048 Base Unit
188.0lbs. (85.5 kg)
DRO (with cables)
5.5lbs. ( 2.5 kg)
TF-1F Blocks (one set)
1.0lbs. ( 0.05kg)
Voltage Requirements (all models)
DRO
100 - 240 volts AC, 50-60 HZ.
Fuse
500mA, 250V
Gage Accuracy (at 68 F / 20 C)
MT-3012-50
±.0001" (±.0025 mm)
MT-3024-50
±.0002" (±.005 mm)
MT-3036-50
±.0003" (±.0076 mm)
MT-3048-50
±.0004" (±.010 mm)
TF-1F Blocks
±.0001" (±.0025 mm)
Repeatability of assembled MIC TRAC
±.00005" (±.0013 mm)
Resolution of MIC TRAC DRO
±.00005" (±.0025 mm)
Service Temperature Range
32° to 100° F (0° to 40° C)
á The recommended temperature for any precision metrology, if a high degree of accuracy is
required, is 68 F. All certifications should be made at 68 F.