MIC TRAC Operation Manual Model MT-3000
Copyright © 2014 Gagemaker. All rights reserved
29
Care and Maintenance
Maintenance Tips
• Keep all unprotected metal surfaces coated with light oil.
• Always use the gage on a sturdy, level surface.
• Avoid dropping the gage or subjecting it to any vibration or impact.
• Use only in a static free environment.
• Keep the unit dry and away from any machine coolant spray.
• Do not place the unit in direct line of flying chips.
• Keep the unit covered when not in use.
• Do not use the unit while standing on a wet surface
• Do not force the movement of any of the mechanical parts. The mechanics are designed to move
freely.
Maintenance Note
There are no user serviceable parts inside the DRO or inside the MIC TRAC base unit. Any disassembly
of either piece of equipment will void the warranty. When used properly, by trained personnel, the MIC
TRAC requires no internal maintenance. We suggest you return your unit to Gagemaker on a regular
basis for re-calibration and certification. When shipping your MIC TRAC, for whatever reason, use the
shipping carton and packing material that came with the unit to minimize the risk of damage. Gagemaker
will assume no responsibility for goods damaged during return shipment due to improper packaging.
Safety Tips
The MIC TRAC can be used in virtually any safe working environment. However, certain precautions
should be taken for safety as follows:
• All cables from the DRO and printer should be kept out of the way of any rotating equipment.
• To avoid electrical shock, DO NOT use the unit while standing on any wet surface.
• Use the correct lifting procedures when transporting the unit.
To Next Page
Loading...
Need help?
General
