MIC TRAC Operation Manual Model MT-3000
30
Copyright © 2014 Gagemaker. All rights reserved
Warranty Information
Gagemaker warrants its products to be free from defects in material and workmanship under normal
operating conditions for 12 months from the date of shipment. This warranty is limited to repairing, or at
Gagemaker’s option, replacing any product which is proven to have been defective at the time it was
shipped and/or suffered damage during shipping; provided buyer has given Gagemaker written notice of
any such claimed defect within 15 days of receipt. Any defective product must be properly packed and
shipped to the Gagemaker factory in Pasadena, Texas USA. This warranty applies to all products when
used in a normal industrial environment. Any unauthorized tampering, misuse or neglect will make this
warranty null and void. Under no circumstances will Gagemaker or any affiliate have any liabilities for
loss or for any indirect or consequential damages. The foregoing warranties are in lieu of all other
warranties expressed or implied, including but not limited to, the implied warranties of merchantability
and fitness for a particular purpose.
Products Requiring Repair or Calibration Return Process
The MIC TRAC MT-3000 is precision calibrated at the factory traceable to NIST. To ensure that the MIC
TRAC is providing accurate measurements, the unit should be calibrated annually, based on frequency
of use and operating conditions.
1. Prior to sending any products to Gagemaker, please call 713-472-7360 and request a Returned
Material Authorization (RMA) number from Sales.
2. Include a Purchase Order or work instructions with the returned product.
3. Place the MT-3000 measurement center in the original shipping carton (refer to the procedure for
Returning the MIC TRAC in this manual) and return to:
Gagemaker LP
712 East Southmore Ave.
Pasadena, TX 77502-110
To Next Page
Loading...
Need help?
General
