G&D DVIVision - Using Single or Double Hotkeys

Configuration
18 · G&D DVIVision
Using single or double hotkeys
The number of “free” key combinations is possibly narrowed if many application
programs with hotkeys are operated on one computer or if different G&D devices
are used in one cascade.
In such a case, a set of key combinations that does not collide with other porgrams
or cascaded G&D devices can be used by applying double hotkeys.
How to activate the use of single or double hotkeys:
After the switching, the active hotkey is being converted into a double hotkey (or
vice versa):
Related topics:
 Changing the single hotkey on page 19
 Changing the double hotkey on page 20
setup mode
1. Press the key combination Hotkey + Backspace (default: Ctrl + Backspace) to
activate the setup mode. If the hotkey delay is active, press the key combi
-
nation for seven seconds.
2. Press one of the setup keys listed below to activate the use of single or
double hotkeys:
S  use of single hotkeys
A  use of double hotkeys
setup menu
1. Establish the connection to the DVIVision system through the terminal
emulation program.
2. Use the arrow keys to select the row Double Hotkey.
3. Press the Space key (repeatedly) to activate the use of single or double hotkeys:
No  use of single hotkeys
Yes  use of double hotkeys
4. Press the S key to save the settings.
Single hotkey Double hotkey
Ctrl Ctrl + Shift
Alt Alt + Shift
Alt Gr Alt Gr + Ctrl
Win Win + Ctrl
Shift Shift + Win