G&D DVIVision - Scope of Delivery

Scope of delivery
G&D DVIVision · 3
Scope of delivery
Standard scope of delivery of the DVIVision series
The KVM extenders of the DVIVision series consist of a computer module
(DVIVision-CPU) and a workstation module (DVIVision-CON).
Additionally, the devices’ scope of delivery includes the following accessories:
 2 x power cable (PowerCable-2 Standard)
 1 x video cable (DVI-D-SL-M/M-2)
 1 x video adapter (DVI-I-HD15F)
 1 x PS/2 mouse cable (PS/2-M/M-2 green)
 1 x PS/2 keyboard cable (PS/2-M/M-2 purple)
 1 x USB device cable (USB-AM/BM-2)
 1 x data cable (Update-Cable-2)
 1 x Installation and Operating Guide
Expanded scope of delivery of -AR and -ARU variants
If you have purchased the variant -AR or -ARU of the DVIVision series, the scope of
delivery additionally includes the following cables:
 2 x audio cable (Audio-M/M-2)
 1 x serial connection cable (RS232-M/F-2)
Additional scope of delivery of multi-channel variants
The multi-channel variants of the DVIVision series provide a separate video cable
for each video channel: The variant DVIVision-MC2 is supplied with two video
cables whereas the variant -MC3 is provided with three video cables.
The scope of delivery of the multi-channel devices provides rackmount sets
(19”
RM-Set-435) to install the devices to a 19” rack. The installation of the
devices to the rack can be carried out with both the front panel or the back panel
facing forwards.
The single-channel devices are available as desktop or as rackmount variant
(see Order numbers on page 45). The rackmount variants always have to be
installed to the rack with the front panel facing forwards.