Configuration
G&D DVIVision · 23
Changing the videomode of the user consoles
In the standard configuration of the DVIVision system, the computer’s video signal
is output at the monitor of the active console as well as at the monitor of the concur
-
rent console.
By applying the function Changing the videomode of the user consoles, the video signal at
the concurrent user’s monitor can be turned off automatically as soon as an input is
made by a user.
If the user has finished his inputs, the monitor at the concurrent console is reactiva-
ted after the automatic input lock has elapsed or the permanent input lock has been
deactivated.
How to (de)activate the video signal at the concurrent user console:
Related topics:
Timeout of the automatic input lock on page 21
Authorising permanent activation of input lock on page 22
This function can only be (de)activated in the setup menu.
setup menu
1. Establish the connection to the DVIVision system through the terminal
emulation program.
2. Select Videomode CPU with the arrow keys, if you want to change this setting for
the local console.
Select Videomode CON with the arrow keys, if you want to change this setting
for the remote console.
3. Press the Space key (repeatedly) to (de)activate the video signal at the con-
current console:
Always On always display the video signal of the concurrent user
Switch Off switch off video signal for inputs of the other user
4. After having selected the desired setting, press the S key to save the settings.
To Next Page
Loading...
