Need help?Do you have a question about the G&D CATVision and is the answer not in the manual?
Details the process of connecting the transmitting unit, including monitor and keyboard/mouse.
Explains how to establish the video connection for the CATVision-MC-CPU.
Describes optional connections for RS232, audio, and USB 1.1.
Covers the steps for installing the CATVision receiving unit.
Details the video connection setup for the CATVision-MC-CON.
Covers optional connections like RS232, audio, and USB 1.1 for the receiving unit.
Explains how to connect the main and redundant power supplies to the devices.
Provides information on supported USB device power requirements.
Details the initial startup sequence and information displayed on the monitor.
Explains system status messages related to connectivity issues.
Describes the message displayed when local keyboard/mouse is not connected.
Details the message shown when the remote unit is not detected.
Explains system status when CAT-x connection and local K/M are missing.
Explains how to get the system operational and describes front panel LEDs.
Defines who is authorized to use the IVT function.
Explains the methods to access the Individual Video Tuning (IVT) mode.
Details how to access IVT using the function menu.
Describes how to call up IVT using a keyboard shortcut.
Provides guidance and tips for optimal video tuning settings.
Lists available settings for adjusting video parameters.
Explains how to change video channels, available for CATVision-MC systems.
Describes how to automatically adjust all video settings.
Explains how to adjust video display parameters manually.
Details how to adjust the video boost for optimal picture quality.
Explains how to use the noise filter to improve video quality.
Describes how to perform fine tuning adjustments for the video signal.
Details how to compensate for run time delays in CAT-x cables.
Explains how to copy IVT settings from one channel to others.
Lists tested resolutions and their corresponding refresh rates.
Provides recommendations for suitable patch and installation cables.
Allows configuration of console-specific settings like screensaver and name.
Configures the system's screensaver and power-down mode.
Enables automatic system logout to enhance security.
Allows assigning a unique name to the console for identification.
Sets the display mode for system information (permanent or temporary).
Configures the position, size, and color of the display on the monitor.
Adjusts the position and size of all AdonIS windows on the display.
Activates special keys for Intelli Explorer Mouse for AdonIS control.
Adjusts color levels to balance color corruption caused by sync signals.
Selects the appropriate keyboard layout for proper character input.
Accesses the main configuration menu for system settings.
Provides a reference to chapter 5.4 for IVT settings.
Allows configuration of various system parameters and hotkeys.
Configures the primary hotkey for accessing system functions like AdonIS.
Sets up a double-hotkey combination for Adonis or IVT access.
Resets the device and settings to their default factory conditions.
Defines if the remote console monitor stays visible or switches dark.
Configures the local console monitor to switch dark or stay visible.
Enables exclusive access for one console to prevent interruptions.
Sets the inactivity time before a blocked console can regain access.
Activates a mode where consoles are locked and monitors switched dark.
Configures keyboard LED flashing for hold function or protected mode.
Sets the scan code for local keyboard communication.
Configures the scan code for remote keyboard communication.
Activates support for USB multimedia keyboards.
Enables support for USB keyboards connected to SUN computers.
Selects the keyboard layout for SUN keyboards.
Configures how temperature warnings are displayed.
Activates support for specific keyboards on the local console.
Activates support for specific keyboards on the remote console.
Selects the synchronization signal type for correct video display.
Configures remote synchronization for separated H/V signals.
Manages user accounts, access rights, and passwords.
Enables or disables user accounts for system access.
Sets the username for a user account.
Resets user account settings to default values.
Grants or denies IVT access rights for a user account.
Assigns access rights to the System Config menu for users.
Controls user access to the User Account menu.
Allows changing the password for a user account.
Provides tools for troubleshooting and re-initializing the mouse.
Outlines the different ways to access and operate the system.
Describes the default access mode with free system access.
Explains how to access the system using defined user accounts and rights.
Details how to log in as a supervisor for unrestricted access.
Allows selectable operation of computers from both consoles.
Enables exclusive access for one console to prevent interruptions.
Activates a mode where consoles are locked and monitors switched dark.
Offers the possibility to switch monitors off based on console actions.
Explains monitor dark switching during automatic console switching.
Details monitor dark switching when permanent access is active.
Logs out the current user from the CATVision system.
Explains how 'Delay' balances run time delays in CAT-x cables.
Details the bidirectional stereo-audio transmission capabilities.
Describes the characteristics and capabilities of RS232 port usage.
Explains the extended transmission distance for USB 1.1 devices.
Provides instructions for updating the CATVision system firmware.
Provides diagnostic information about the CATVision system.
Lists the components included with the CV-Power-Expansion.
Details the installation procedure for the CV-Power (ATX module) within a PC.
Explains how to connect the CV-Power card to the CATVision-CPU.
Details connecting the key switch to the CATVision-CON unit.
Lists the technical specifications for the CATVision system.
Provides technical specifications specific to the CATVision-MC models.
Lists functions and their corresponding default and personal hotkeys.
Details IVT parameters and their configuration keys.
Instructions on setting the supervisor password for system configuration.
General| Technology | CAT |
|---|---|
| Video Resolution | 4K UHD |
| Resolution | 3840 x 2160 |
| Input Ports | HDMI |
| Output Ports | HDMI |
| Power | 5V DC |
| Power Supply | External |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
To Next Page
