Guntermann & Drunck GmbH Operating Instructions
CATVision (MC)
6 Configuration
The CATVision system can be adapted to your needs. The configuration is
done via AdonIS.
With CTRL + NUM (Default) you open AdonIS:
Function CVM
F2: IVT
F3: Console Setup
F6: Config
F8: Logout
Mouse Utility
System Info
Esc Enter
page 28
In the Function menu the following options can be used:
F2: IVT (see chapter 5.3)
F3: settings at the console (see chapter 6.1)
F6: main configuration menu; here additionally IVT can be called up,
User Accounts can be opened and changes in system settings
can be made (see chapter 6.2)
Mouse Utility: Reinitialisation of the connected mouse if the
initialisation is lost (see chapter 6.3)
To Next Page
Loading...
