Guntermann & Drunck GmbH Operating Instructions
CATVision (MC)
page 47
6.2.3.3 Set Account Defaults
Set Account Defaults
This function sets back all changes of the USER ACCOUNT to the default
values which can be found at the end of a chapter at “default”.
Exception: User Name + User Password
Move the cursor to the entry and confirm with ENTER. The function will then be
active in the background.
With F1 you save the new settings and go back to SELECT ACCOUNT.
6.2.3.4 IVT Access
IVT Access: Yes/No
Here you can give the owner of this account access to IVT or not.
Move to the array and give access to IVT by entering Y or deny access by
entering N.
SPACE can additionally be used for alternative switching.
With F1 you save the new settings and go back to SELECT ACCOUNT.
Default: IVT-Access = Yes
6.2.3.5 System Config Access
System Config Access... No/Yes
Here you can give the owner of this account access to the menu System
Config or not.
Move to the array and give access to System Config by entering Y or deny
access by entering N.
SPACE can additionally be used for alternative switching.
With F1 you save the new settings and go back to SELECT ACCOUNT.
Default: System Config Access = No
To Next Page
Loading...
