Guntermann & Drunck GmbH Operating Instructions
CATVision (MC)
6.2.2 System Config
Move in the menu Config Menü to the entry System Config and press Enter.
The following window will open:
SYSTEM CONFIG CVM
Hotkey: Ctrl
Double Hotkey: Off
Set System Defaults:
…
Remote Video:
On
Local Video:
On
Permanent Access:
Both
Timeout:
1 s
Protected Mode:
Off
Keyb. LED flash:
On
Scan Code Set Local:
2
Scancode Set Remote:
2
USB Multimedia-Keyboard: No
USB SUN-Keyboard Mode: No
USB SUN-Keyboard Layout: US
Temperature Warning: OSD
Keyboard Type Local: …
Keyboard Type Remote: …
Signal type input: Standard
Remote Sync: as input
Esc Enter F1: Save
If there is a conflict between the hotkeys used in AdonIS and your software you
can change it here.
Another reason for changing the hotkeys may lay in the combination of several
G&D switch types. In the delivery status of all G&D products, the default
HotKey-Combination is set to CTRL + NUM (as an example for calling up the
AdonIS).
page 36
To Next Page
Loading...
