Guntermann & Drunck GmbH Operating Instructions
CATVision (MC)
page 48
6.2.3.6 User Account Access
User Account Access ... No/Yes
Here you can give the owner of this account access to the menu User Account
or not.
Move to the array and give access to the User Account by entering Y or deny
access by entering N.
SPACE can additionally be used for alternative switching.
With F1 you save the new settings and go back to SELECT ACCOUNT.
Default: User Account Access = No
6.2.3.7 Change Password
Change password...
Here you can define the User Password. Take care that the user password
and the user name exist only once. The entry is possible for alphanumerical
characters.
Move the cursor to the corresponding entry in the menu USER ACCOUNT.
After having pressed ENTER you get into the submenu where you are asked to
enter the password.
CHANGE PASSWORD CVM
Please enter your new
password twice:
[Min. 4, max. 12 characters]
Esc Enter
The input can be done with min 4 and max 12 alphanumerical characters.
To Next Page
Loading...
