Guntermann & Drunck GmbH Operating Instructions
CATVision (MC)
6.1 Console Setup
By pressing F3 in the Function Menu you will get to the Console Setup for the
activating console.
CONSOLE SETUP CVM
Screen Saver: OFF
Auto Logout: OFF
Console Name: CVM
Display: Temp
Display Position: …
Menu Position: …
AdonIS by Mouse: NO
OSD sync: OFF
Keyboard Layout: German
Esc Enter F1:Save
6.1.1 ScreenSaver Settings
The ScreenSaver to be set is started by CATVision and has nothing to do with
the ScreenSaver of the computer.
As in general there is only one indirect connection (via CATVision) between the
computer and the monitor you should switch off the ScreenSaver of the
computers for making work easier.
The ScreenSaver of CATVision takes over this task; it puts the monitor to the
Power-Down Mode.
Move the cursor to the line ScreenSaver. The current entry can be written over
or edited by pressing ENTER.
Valid is a time of 1 - 60 minutes. The entry “0” puts the ScreenSaver to “OFF”.
ENTER completes the entry.
For saving and closing this menu press F1.
page 29
To Next Page
Loading...
