G&D CATVision - Manual Logout

Guntermann & Drunck GmbH Operating Instructions
CATVision (MC)
page 57
7.6 Manual Logout
By pressing F8 in the Function Menu you log-out.
This function deletes log-in to the CATVision.
After execution CATVision opens the LOGIN window:
 If you are still in the mode OPEN ACCESS you can directly log-in
again with Enter.
 If you have opened User Accounts and OPEN ACCESS was disabled
you can only have access to the system after entering your user
password or the supervisor password.
Notice: You should use this function always then when you want to protect
your computer against unauthorized access, e.g. when you leave
your working place.