Guntermann & Drunck GmbH Operating Instructions
CATVision (MC)
5.2.1 Keyboard/Mouse local not attached
If local Keyboard/Mouse is not attached to the CATVision-CPU following
information appears on your monitor (local and remote).
SYSTEM STARTUP CVM
to call up AdonIS, press
Ctrl + Num
pc unit found
remote unit found
no local mouse found
no local keyboard found
Please wait…
In this case the monitor at the CATVision-CON changes automatically to the
next Information-Window (IVT-Information). To close this window or to start
IVT you have to connect at least a keyboard to the system.
5.2.2 Remote Unit not attached
When the CATVision-System detects no connection to the remote unit
CATVision-Con (after swichting on the system), following information appears
on your local monitor.
SYSTEM STARTUP CVM
to call up AdonIS, press
Ctrl + Num
pc unit found
local mouse found
local keyboard found
no remote unit found
check connection to local
keyboard and remote unit
Please wait…
page 15
To Next Page
Loading...
