Page 100
33) Press No twice. The display will show:-
34) Enter the Time required (in seconds) followed
by Yes. The display will show:-
35) Press No. The display will show:-
The Setting Sounders option determines if any, or all Part Sets are audible (Exit
Tones) or not. This is a useful feature when part of the family may already be
asleep when the system is being Part Set.
36) Press Yes.The display will show:-
37) Press the No key to scroll through the options.
Options available for Setting Sounders are.
Always Audible Exit Sounder will be audible for all Part Sets
Silent If Part 1 Exit Sounder will be silent during a Part 1 Set
Silent If Part 2 Exit Sounder will be silent during a Part 2 Set
Silent If Part 3 Exit Sounder will be silent during a Part 3 Set
Always Silent Exit Sounder will be silent during ANY Part Set
When using a silent Part Set a single beep will be heard at the end of the Exit
Time to confirm the system has Set.
38) When you have the required setting displayed
press Yes. The display will show:-
Final Set Delay
> _ _
Program Setting
Delay ?
Program Setting
Sounders ?
Program Setting
Sounders ?
Exit Sounder . .
= Always Audible
PR5892 Rev11 800 Series Eng Ref 15.qxd 16/11/2006 11:21 Page 100
To Next Page
