Page 73
LCD Menu Shortcut Numbers
You are able to jump to various common options when programming by entering the
relevant menu numbers. With a Header showing, key in the appropriate menu
number, then press Yes. Options available will be panel dependant.
Menu No. Jumps to
1 Relay Mode / PGM3 Mode
2 Timers On Time
3 Timers On Time
4 Timers Off Time
5 Timers Off Time
6 PA Mode
7 PA Mode
8 Chime Level
9 Entry Exit Level
10 Exit Sounder Mode
11 Final Set Delay
12 Full Set Setting Time / Setting Mode
13 Part 1 Set Setting Time / Setting Mode
14 Part 2 Set Setting Time / Setting Mode
15 Part 3 Set Setting Time / Setting Mode
16 Full Set Setting Time / Setting Mode
17 Part 1 Set Setting Time / Setting Mode
18 Part 2 Set Setting Time / Setting Mode
19 Part 3 Set Setting Mode / Setting Time
20 Alert 1 Keys Mode / On Off
21 Alert 2 Keys Mode / On Off
22 No. of Keypads / Multi On Off / Keyswitch
23 Bell Delay / No. of Bell Arms
24 Bell Ring Time / Sounder Mode
25 Bell Delay / No. of Arms
26 NovActive On Off
27 Bell Tamper Ring On Off
28 Entry Time 1
29 Entry Time 2 (use 00 for DD243:2002 system)
30 Fire Zone Delay
31 D1 Mode / D2 Mode
32 D1 Mode / D2 Mode
33 Channel Start Polarity
34 Digicom Type
35 Key Beep Level
PR5892 Rev11 800 Series Eng Ref 15.qxd 16/11/2006 11:20 Page 73
To Next Page
Loading...
