Page 74
Menu No. Jumps to
36 No. of Keypads / Multi On Off / Keyswitch
37 Zone Re-Arm / Double Knock Time
38 Engineer Code
39 Remote Reset / Line Fault Source
40 Line Fault Sounders
41 Line Fault Mode
44 Latch Terminal Mode
45 Bell Ring Time / Sounder Mode
46 Mains Fail Delay
47 Tamper Reset Mode
48 Backlight Mode
49 Zone Re-Arm / Double Knock Time
50 On-Board Zone Wiring Modes
51 On-Board Zone Wiring Modes (enter zone No.)
52 Test Zone (entering zones to be on test)
53 Save Panel NVM to PTM
54 Service Due Weeks
56 Alert 1 Keys Mode / Alert 1 Keys On Off
57 Alert 2 Keys Mode / Alert 2 Keys On Off
58 Digicom Channels
64 Alarm Restore / Abort Time
65 Digicom Type or Test
66 E/E Zones in Part Set
67 Engineer Code Locked / Unlocked
68 Strobe Confirm
69 Auto Part Set
70 Part Set Bells
71 Zone Types (enter zone No.)
72 Zone Expansion Type
73 ID mapping (set expansion type ZEX / ID first)
74 ID mapping (set expansion type ZEX / ID first)
75 ZEX 1 Wiring
76 ZEX 2 Wiring
77 ZEX 3 Wiring
PR5892 Rev11 800 Series Eng Ref 15.qxd 16/11/2006 11:20 Page 74
To Next Page
Loading...
