Page 72
In conclusion, the Yes and No Keys are used to navigate. The No Key is also used to
change a value (may also require a numeric input) and the Zero Key is used to move
back a level (not when the display is expecting a numeric input).
Program the GardTec
800
series Control Panels using the headers and options above
or alternatively use the appropriate shortcut menu numbers.
Headers & Options
Service / PTM
Service Timer On/Off
Time To Next Service
Service Tel No.
Lock-Out On/Off
Engineer Mode Constant/Timed
Custom Screens
LCD Status Display
(To conform with EN standards, LCD Status is
defaulted to Off and cannot be changed)
LED Status Display
Custom Display On/Off
Program Text
Diagnostics / Log
List Event Log
Change List Diagnostics
PSU Diagnostics
NovActive Diagnostics
PSU Test Time
Aux Volts
Battery Volts On Charge
Battery Volts Off Charge
Headers & Options
Alarm Confirm
Window Time
On Entry
Sounder Mode
Reset Mode
Secondary Time
ET Mode
Bell Mode
Strobe Mode
Start Delay
ACE Battery Monitor
Comms Restore
Keypad Opening
PR5892 Rev11 800 Series Eng Ref 15.qxd 16/11/2006 11:20 Page 72
To Next Page
Loading...
