Gate Titan User Guide

14
WWW.GATEE.EU
USER GUIDE
DEANS-T READY
COATING
MINI-TAMIYA ADAPTER
14.8V LI-PO READY
BUILT-IN SELF-TEST
PRINTED QUICKSTART
This allows you to quickly check whether the TITAN is working properly. If any problem
occurs, the Diagnostic Trouble Codes will indicate where the problem lies.
Thanks to its special conformal coating, the unit is resistant to atmospheric conditions
(Military Specification: MIL-V-173C).
The product has factory-fitted low-resistance deans-t connector.
Thanks to the Mini Tamiya Adapter included in the kit, you can smoothly connect the
TITAN to a standard battery.
The TITAN can be used with batteries up to and including 14.8V LI-PO. The minimum
operating voltage is 3.75V and maximum is 17V.
Make your adventure start more easily with a new product. The quickstart contains basic
information and hints.

Gate Titan Specifications

General

MOSFET	Yes
Battery protection	Yes
Trigger sensitivity adjustment	Yes
Pre-cocking	Yes
ROF control	Yes
Active brake	Yes
Diagnostic system	Yes
Programmable	Yes
Cycle Detection	Yes
Compatibility	V2 Gearbox
Low current consumption in sleep mode	0.2mA
Connectivity	USB-Link, Blu-Link
Fire Modes	Semi, Burst
Bluetooth support	Yes