currently set configuration values, and allow
you to modify them.
These configuration values are specific to each
sensor (as identified by sensor number). You
will need to select each sensor number in turn
and configure them separately.
Notes:
- For quick configuration, the copy function
allows you to easily copy the settings of the
current sensor to another sensor.
Alphanumeric text field for setting a friendly
name to easily identify the sensor.
You may input up to a maximum of:
▪ 8 characters
Alphanumeric text field for setting a short code
name identifying this sensor on the OSD (text
data overlay on the video).
You may input up to a maximum of:
▪ 5 characters
DEFAULT SETTINGS
Sensor Number: 1
▪ Sensor Name – BRAKE
▪ OSD Name – BK
Sensor Number: 2
▪ Sensor Name – WARNING
▪ OSD Name – WN
Sensor Number: 3
▪ Sensor Name – STOPARM
▪ OSD Name – SA
Sensor Number: 4
▪ Sensor Name – DOOR
▪ OSD Name – DR
To Next Page
Loading...