CHAPTER 2: Checking Out Your Convertible Notebook www.gateway.com
28
Changing modules
Your convertible notebook’s modular bay supports different bay modules, such
as a CD, DVD, combination DVD/CD-RW, or multi-format DVD±RW drive, or
multibay battery.
To change bay modules:
1 If you are removing a drive, make sure that there is no disc in it.
2 Turn off your convertible notebook (do not place it in Standby or
Hibernate mode).
3 Make sure the LCD panel is in notebook mode, then close the LCD panel.
4 Disconnect your convertible notebook from the optional port replicator.
5 Turn your convertible notebook over so the bottom is facing up.
6 Remove the modular bay lock screw (if one is present), then slide and hold
the module bay latch. The module may move out slightly.
Modular bay lock screw
To Next Page
Loading...
