Operating instructions
3.6 QS4 Technical Reference Manual
Tasks that require you to log on as a Level 2 operator
What is it you want to do This is how you do it
Distribute event records according
to their alternate message routing
1. Press Menu.
2. Choose Activate > Alt Msg Route.
Distribute event records according
to their primary message routing
1. Press Menu.
2. Choose Restore > Prm Msg Route.
Disable a Zone
1. Press Menu.
2. Choose Disable > Zone.
3. Select a Zone from the pick list then press Enter.
Enable a Zone
1. Press Menu.
2. Choose Enable > Zone.
3. Select a Zone from the pick list then press Enter.
Disable a device
1. Press Menu.
2. Choose Disable > Device.
3. Enter the device address, where:
PP is the panel number (01)
CC is the card number
DDD is the circuit or device number
Enable a device
1. Press Menu.
2. Choose Enable > Device.
3. Enter the device address, where:
PP is the panel number (01)
CC is the card number
DDD is the circuit or device number
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...