GE Advent User Manual

3
Advent Commercial Fire System
Household Fire Warning System Units (UL 985)
Basic system, plus:

Hardwire Smoke Detector (Compatibility Identifier
60-562, 20 per loop maximum):
 System Sensor models 2100S, 2100TS, 2100D,
2100TD, 2400, or 2400TH added (learned) into Zone
Type 80.
 Sentrol models 429AT, 521B, or 521BXT added
(learned) into Zone Type 80.
The basic system may also include:

SuperBus 2000 RF Transceiver (60-821) for use with
listed wireless signaling devices.
 Wireless Smoke Sensor (60-506-319.5 or 60-848-02-95)
added (learned into Zone Type 80.
 SuperBus 2000 Printer Automation Module
(60-783) for use with a listed printer.
 SuperBus 2000 Dual Phone Line Module (60-768) for
expansion to primary and secondary phone line reporting.
 24V Smoke Loop SnapCard (60-767).
System Setup and Programming
The system Feature Numbers shall be set as follows in
UL 985 listed systems:
Household Burglar-Alarm System Units (UL 1023)
Basic system plus:
 Hardwire Magnetic Contact (13-068 or 13-071)
The basic system may also include:

SuperBus 2000 RF Transceiver (60-821) for use with
listed wireless signaling devices.
 Wireless Learn Mode Door/Window Sensor (60-362)
 SuperBus 2000 Printer or Automation Module
(60-783) for use with a listed printer.
 SuperBus 2000 Dual Phone Line Module (60-768) for
expansion to primary and secondary phone line reporting.
System Setup and Programming
The system Feature Numbers shall be set as follows in
UL 1023 listed systems:
Table 4. UL 985 Listed System Settings
Feature
No.
Feature Required Setting
xx002 Siren Time Out 4 min. minimum
xx003 Standard Entry Delay 45 sec. maximum
xx004 Exit Delay 60 sec. maximum
yy004 Communication Format 0 Contact ID
xx085 Enable Police Panic Keys 1-On
xx086 Enable Auxiliary/Medical
Panic Keys
1-On
xx087 Enable Fire Panic Keys 1-On
xx088 Report Partition/Area Events
to Central Station
1-On
xx092 Enable Auto Force Arming 0-Off
xx097 Exterior Arming Verification 0-Off
xx102 One-Time Reset Enabled 0-Off
xx108 Enable Daily Reporting of
Partition Trouble
1-On
17036 AC Stable Time 90 sec. maximum
17041 Hours to Delay Before
Reporting AC Failure
8 hours (or less)
17049 RF Supervisory Time A 4 hours
17069 No Phone Line Attached 0-Off
17072 Enable RF Jam Detect 1-On
17073 Battery Test Interval 1-4 hours
17076 Commercial or Residential
Installation
0-Off Residential
17078 Detect Receiver Failure 1-On
17079 Alarm Messages Play at High
Vo l u m e
1-On High
17096 Report System Events 1-On
47004 Zone Attributes (edit zones) N/A
xx = Two digit partition number.
yy = Two digit non-pager phone number.
Table 5. UL 1023 Listed System Settings
Feature No. Feature Required Setting
xx002 Siren Time Out 6 min. minimum
xx003 Standard Entry Delay 45 sec. maximum
xx004 Exit Delay 60 sec. maximum
yy004 Communication Format 0 Contact ID
xx088 Report Partition/Area Events
to Central Station
1-On
xx092 Enable Auto Force Arming 0-Off
xx097 Exterior Arming Verification 0-Off
xx102 One-Time Reset Enabled 0-Off
xx108 Enable Daily Reporting of
Partition Trouble
1-On
17036 AC Stable Time 90 sec. maximum
17041 Hours to Delay Before
Reporting AC Failure
8 hours (or less)
17049 RF Supervisory Time A 4 hours
17069 No Phone Line Attached 0-Off
17072 Enable RF Jam Detect 1-On
17073 Battery Test Interval 1-4 hours
17076 Commercial or Residential
Installation
0-Off Residential
17078 Detect Receiver Failure 1-On
17079 Alarm Messages Play at High
Vo l u m e
1-On High
17096 Report System Events 1-On
Table 4. UL 985 Listed System Settings (Continued)
Feature
No.
Feature Required Setting

GE Advent Specifications

General

Brand	GE
Model	Advent
Category	Security System
Language	English